Kontaktieren Sie uns!
Mo–Fr 8–16:30 Uhr

+49 (0)6172 457097


Internal chamber dimensions:
960 x 960 x 230 mm

External dimensions:
2050 x 1310 x 1130 mm

Seal length:
850 mm

Vacuum pump:
160, 250 or 300 m³/h

600 kg or 650 kg

Power supply:
3 phases, 230/400 V, 50 Hz
(Special voltages on request)

Welding bar


  • High-quality Busch vacuum pump
  • Platform-style construction for easy cleaning
  • High pressure seal welding 
  • Robust stainless steel lid – with inspection window upon request
  • Starter kit with consumables (teflon tape, welding wire) included

suitable for:

Feature Equipment TITAN-X 850

Control system Z 3000

  • Sensor control with 99 program slots
  • H2O sensor for automatic packaging of liquids
  • “Red-Meat-Programm“, Step-by-step vacuum function and cyclical vacuum
  • Seal welding systems separately controllable
  • Service program
  • Spray-water protected version

Seal welding

Double seam weld

Our double-seam weld seals the bag with an extra-wide flat-profile wire that creates two parallel weld seams. This weld guarantees redundant reliability of the seal.



Simple cut-off seal weld

Our simple cut-off seal weld consists of two parallel welding wires: The inside flat surface wire seals the bag, while the outer round profile wire cuts off excess bag material.


Separately adjustable cut-off weld

This weld is similar to the simple cut-off weld with the difference that the heating duration of each wire is separately adjustable. This feature is especially important for the processing of shrinkable bags. If required, the cutoff wire can be deactivated.

Over-/ under seal weld

Our dual action weld seals the bag from above and below. This weld type is especially suitable for bags with high material density such as aluminum bags.


  • Gassing unit with 4 x 4 long stainless steel nozzles (or number as requested)
  • Simple cut-off seal weld
  • Separately adjustable cut-off weld 
  • Over-/ under seal weld (not possible in combination with separately adjustable cut-off weld)
  • Soft ventilation
  • Lid inspection window
  • Higher performance vacuum pump with 250 m³/h, 3 phases, 230/400 V, 50 Hz, D.C.
  • Higher performance vacuum pump with 300 m³/h, 3 phases, 230/400 V, 50 Hz, D.C.
  • Lid automation 
  • External control unit positioned onto a lateral stainless steel arm
  • Lid-volume reduction (3 specially shaped insertion plates with stainless steel fastenings)
To top