MAX-F 50 *depiction with control system Z 3000

Internal chamber dimensions:
530 x 545 x 180 mm

External dimensions:
650 x 700 x 1000 mm

Seal length:
500 mm

Vacuum pump:
25 m³/h oder 63 m³/h

Weight:
125 kg oder 145 kg

Power supply:
3 Phasen, 230/400 V, 50 Hz
(Special voltages on request)

Welding bar

Features

  • High-quality Busch vacuum pump
  • Deep-drawn vacuumchamber
  • High pressure seal welding
  • Cable-free welding-bar construction
  • Starter kit with consumables (teflon tape, welding wire) included

suitable for:

Feature Equipment MAX-F 50

Seal welding

Simple cut-off seal weld

Our simple cut-off seal weld consists of two parallel welding wires: The inside flat surface wire seals the bag, while the outer round profile wire cuts off excess bag material.

 

Double seam weld

Our double-seam weld seals the bag with an extra-wide flat-profile wire that creates two parallel weld seams. This weld guarantees redundant reliability of the seal.

Accessories

  • Programmable sensor control system Z 3000 incl.
  • High pressure seal weld
  • Gassing unit with 2 nozzles (we recommend the sensor control system Z 3000)
  • Slanted bag holder for packaging of liquids (stainless steel)
  • Suction device for standardized catering boxes
  • Soft ventilation (only available in combination with sensor control system Z 3000)
  • Extra charge for A.C. execution of pump 25 m³/h, 1 phase, 230 V, 50 Hz
  • Higher performance vacuum pump with 63 m³/h, 3 phases, 230/400 V, 50 Hz, D.C.
  • Stainless steel lid (usable height 185 mm)
  • Over-/ under seal weld (only available in combination with stainless steel lid)
  • Lid inspection window (only available in combination with stainless steel lid)
nach oben