Vakuum
   
 

BOSS X 880 VLS
(on the photo left) here combined with an automatic shrink dip tank and a draining station.

  Int. chamber dimensions: 810 x 810 x 125 mm (with dome lid: usable height 200 mm)
  Seal length: 2 x 800 mm
  Vacuum pump: 160 m³/h or 250 m³/h
  Control system: programmable sensor
control 9000
  External dimensions: 1.750 x 1.000 x 1.100 mm
  Connection: 3-phase, 230/400 Volt, 50 Hz, D.C. (Special voltages upon inquiry)
 
Extra equipment: • Gas flush device
• Top / bottom welding
• Separately controllable   separating welding
• Slow air release
• Automatic lid shift
• Dome lid (enlarges usable height)
• Additional rear sealing device
   
  EK 1000
  BOSS X 860 VLS
  BOSS X 880 VLS
   
 
   
  Boss X 880 VLS is a vacuum double chamber machine with automatic product processing. This allows an easy working and results in a very high packaging output.

If the machine is equipped with an automatic lid shift it is no longer necessary to pull the lid manually from one chamber to the other.

High-quality stainless steel finish, equipped with a double welding system or a “Top/bottom welding” (necessary
for the sealing of particularly thick vacuum bags or aluminium bags) or a “Separately controllable separating welding” (to cut off neatly the excess length of the bag), a programmable sensor control.

For the vacuum packing of soft and sensitive products the machine can be delivered with a gas flush device.
If the machine is equipped with a dome lid the usable height is enlarged from 125 mm to 200 mm.