Vakuum
   
 

NT 42 N
Stainless steel lid with large transparent control pane
  Int. chamber dimensions: 440 x 445 x 165 mm
  Seal length: 420 mm
  Vacuum pump: 21 m³/h
  Control system: digital
  External dimensions: 500 x 600 x 450 mm
  Connection: 3-phase, 230/400 Volt, 50 Hz, D.C. or 1-phase, 230 Volt, 50 Hz, A.C. (Special voltages upon inquiry)
  Extra equipment: • Gas flush device
• Top / bottom welding
• Programmable sensor   control 9000
• Slow air release
• ESD version (for the   packaging of electronic parts)
   
  NT 42 N
  NT 1/46 N and NT 2/46 N
  NE 42 N
  NE 48 N
  NE 1/46 N and NE 2/46 N
  NE 1/63 N and NE 2/63 N
  NE 2/14 N
  NE 2/18 N
   
 

NT 42 N is based on our model NT 42 F.
The important difference is that the NT 42 N is equipped with a stainless steel lid instead of a plastic dome lid. Because of that it is possible to install the special welding system “Top / bottom welding” into the NT 42 N. This system is implemented when particularly thick vacuum bags or aluminium bags need to be sealed.

NT 42 N :
High-quality stainless steel finish, equipped with a double welding system (or Extra equipment free-of-charge with separating welding), a digital control system or a programmable sensor control, a quick-stop for packing liquids (e.g. soup, sauces, marinade), a large vacuum indicator and insertion plates for level adjustment.

For the vacuum packing of soft and sensitive products the machine can be delivered with a gas flush device.